manualshive.com logo in svg

Lucent Technologies PacketStar PSAX 2300, User Manual

The Lucent Technologies PacketStar PSAX 2300 is a cutting-edge networking device that allows seamless data transmission. Enhance your understanding and maximize its potential with our comprehensive User Manual, available for free download at manualshive.com. Equip yourself with the knowledge to harness the power of this impressive product.

Share
Download
background image

255-700-447

13-23

 PacketStar

®

 PSAX 2300 Multiservice Media Gateway User Guide

,  Issue 1

Release 9.0.0

Chapter 13  Upgrading PSAX System Software

Manually Selecting I/O and Server Module Firmware Drivers

A firmware driver is a binary file used to initialize (boot) an I/O or a server 
module. The two types of drivers are the default driver and a nondefault 
(configurable) driver. The PSAX system selects the default driver when the 
I/O or server module boots for the first time after it is inserted into the PSAX 
chassis.

Manually selecting a different firmware driver (other than the default driver) 
for an I/O or a server module includes the following tasks:

•

“Accessing the Firmware Version Control Window”

•

“Selecting a Firmware Driver”

•

“Downloading a Firmware Driver”

Accessing the Firmware Version Control Window

To access the Firmware Version Control window on which you change or 
update firmware drivers for I/O and server modules, perform the steps in the 
following procedure.

Begin

1

On the Console Interface Main Menu window (see Figure 13-7), select 
the Software Version Configuration option.

The Software Version Configuration window is displayed.

2

On the Software Version Configuration window (see Figure 13-8), select 
the Firmware Version Control option.

The Firmware Version Control window is displayed.

Figure 13-7.  Console Interface Main Menu Window (Software Version 

Configuration Option Selected)

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PacketStar PSAX 2300

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Brand: ABB Pages: 28
YASKAWA P1000 Quick Start Manual preview
P1000
Brand: YASKAWA Pages: 256
National Instruments PXIe-4340 User Manual preview
PXIe-4340
Brand: National Instruments Pages: 31
National Instruments NI 9882 Operating Instructions Manual preview
NI 9882
Brand: National Instruments Pages: 24
National Instruments SCXI SCXI-1102 User Manual preview
SCXI SCXI-1102
Brand: National Instruments Pages: 85
National Instruments SCXI SCXI-1102 Application Note preview
SCXI SCXI-1102
Brand: National Instruments Pages: 10
National Instruments PXIe-4353 Calibration Procedure preview
PXIe-4353
Brand: National Instruments Pages: 16
National Instruments PXIe-6591R User Manual preview
PXIe-6591R
Brand: National Instruments Pages: 98
National Instruments CompactRIO cRIO-9002 Operating Instructions Manual preview
CompactRIO cRIO-9002
Brand: National Instruments Pages: 21
National Instruments cDAQ-9133 User Manual preview
cDAQ-9133
Brand: National Instruments Pages: 145
National Instruments cRIO-9039 User Manual preview
cRIO-9039
Brand: National Instruments Pages: 42
National Instruments cDAQ-9132 Safety, Environmental, And Regulatory Information preview
cDAQ-9132
Brand: National Instruments Pages: 8
National Instruments PXIe-5693 Calibration Procedure preview
PXIe-5693
Brand: National Instruments Pages: 54
SAI HVAC Compact Comfort VAV12 User Manual preview
Compact Comfort VAV12
Brand: SAI HVAC Pages: 16
saia-burgess PCD3 Series Hardware Manual preview
PCD3 Series
Brand: saia-burgess Pages: 203
Sailor N420 Technical Manual preview
N420
Brand: Sailor Pages: 1
Haberl Electronic 1E0671-1 MCR2.9 User Manual preview
1E0671-1 MCR2.9
Brand: Haberl Electronic Pages: 9
J+J J4C Series Installation Instructions preview
J4C Series
Brand: J+J Pages: 2

Brands by name

Popular brands

Load more brands