255-700-447
6-13
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Chapter 6 Configuring ATM PNNI
Configuring an ATM PNNI Node Timer
Configuring an ATM PNNI Node Timer
Begin
1
From the PNNI Node Configuration window, select PNNI Node Timer
Table or press Ctrl+T.
The PNNI Node Timer Configuration window is displayed (see
Figure 6-6).
2
Enter the values for this window according to the information provided
in Table 6-5.
3
After setting all the values on the window, select Apply Configuration
or press Ctrl+A.
A trap message at the bottom of the window confirms the configuration
application.
4
Select Go Back to Previous Screen or press Ctrl+B to return to the
PNNI Node Configuration window if you need to configure other field
values.
End
[Preferred Pgl]
Default: 0
Range: N/A
Format: Hexadeci-
mal address (up to
11 octets)
Displays the preferred PGL. To select, any node com-
pares the leadership priorities and node IDs advertised
in the PTSEs in the topology database, and determines
which nodes reachable from itself.
[Peer Group
Leader]
Default: 0
Range: N/A
Range: Hexadeci-
mal address (up to
11 octets)
Displays a node of a peer group that does the extra
work of collecting, aggregating, and building data that
is used to represent the entire peer group as a single
node. This infomation is available in the parent node.
[Time Stamp]
Default: 00:00:00
Range: N/A
Format: hh:ss:mm
(hour, second,
msec.)
Displays the recorded completion time of a successful
PGL election. If the PGL election is unsuccessful, the
timer will display with the default value.
*
Peer Group Leader.
Table 6-8. Field Descriptions for the PNNI Node PGL
*
Configuration Window (Continued)
Field Name
Field Values
Description