Chapter 10 Configuring ATM Security Agents
Configuring ATM Security for ATM PNNI SVCC RCC Nodes
10-20
255-700-447
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Viewing ATM Security Agent Statistics for an ATM PNNI SVCC RCC Node
To view statistics for a configured ATM security agent for an ATM PNNI SVCC
RCC node, perform the steps in the following procedure.
Begin
1
On the PNNI System-Wide Configuration menu window, select the PNNI
SVCC RCC Information option.
The PNNI SvccRcc Table window is displayed.
2
On the PNNI SvccRcc Table window, select a line containing the node for
which you want to view ATM security agent information.
The PNNI SVCC RCC Information window is displayed (see Figure 10-9).
For more information about this window, see Chapter 6.
3
On the PNNI SVCC RCC Information window, select the ATM Security
Statistics command.
The PNNI SVCC RCC Security Statistics window is displayed (see
Figure 10-10). The commands and fields on this window are described in
Table 10-9 and Table 10-10.
4
To view all configured ATM security agents in the PSAX system, go the
procedure in the section, “Viewing All ATM Security Agents in the Sys-
tem” on page 10-45.
End
[Sec Admin Status] Default: OutOfSer-
vice
Range: N/A
Format: Predefined
Displays the operational status of the ATM secu-
rity agent.
OutOfService
Indicates that the ATM security agent is out of
service.
InService
Indicates that the ATM security agent is in ser-
vice.
Table 10-8. Field Descriptions for the ATM PNNI SVCC RCC Security Configuration Window (Continued)
Field Name
Field Values
Descriptions