manualshive.com logo in svg

Lucent Technologies PacketStar PSAX 2300, User Manual

Share
Download
Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 39

255-700-447

1-5

 PacketStar

®

 PSAX 2300 Multiservice Media Gateway User Guide

,  Issue 1

Release 9.0.0

Chapter 1  Getting Started

Help Information

•

To navigate through the Console windows, use the shortcuts listed in 
Table 1-4.

On all the PSAX system windows, each command or menu option has an 
underlined letter. The control key plus an underlined letter is a shortcut to 
that command or menu option. You can use the navigation keys and hotkeys 
with the Caps Lock key on or off. Always observe the status line at the bot-
tom of the window for instructions and information.

Help Information

The Help windows are accessible from any window in the PSAX system con-
sole interface. To access the Help windows, press the ? (Question Mark) key 
on any window. In addition to the Help windows, the Console Interface win-
dows display contextual help in the information line at the bottom of each 
window. Contextual help provides information about the command or field 
currently highlighted on that window. The information line also displays 
error codes and responses to commands. All responses and notifications are 

Table 1-3.  System Responses to Selecting Options, Fields, or Commands

For a selected...

the following occurs:

option name

The window corresponding to the option name is displayed.

field

The following variations occur:

•

The field entry area is blank or contains the default or previously 
entered value. Press Enter to enter or change data in this field. Press 
Enter again to exit edit mode.

•

The field entry area, like the field name, is displayed in reverse video 
image and contains a predefined set of values, which you can view or 
select by pressing Enter to navigate forward through these values. To 
navigate backward through these field values, press Ctrl+H or the 
Backspace key.

Read-only fields, which you cannot change, are enclosed in square brack-
ets (example:

 

[LineStatus]).

command

The following variations occur:

•

A message in the information line indicating an error or successful com-
pletion of the command is displayed.

•

The next higher level or previous window (window name) is displayed.

•

The next lower level or succeeding window (window name) is displayed.

Table 1-4.  Shortcut Keys for Navigating Console Interface Windows

If you want to...

press...

redisplay the previous window

Ctrl+B on the window.

redisplay the Console Interface Main Menu window

Ctrl+G on the window.

refresh the window

Ctrl+R on the window.

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands