Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 538

Page: 538 / 680

Chapter 13 Upgrading PSAX System Software

Upgrading Using the File Transfer Protocol Method

13-6

255-700-447

PacketStar

PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Table 13-3. Field Descriptions for the SRD Download Configuration Window

Field Name

Field Values

Description

IP Address

Default: 000.000.000.000

Range: N/A
Format: numeric (valid dotted
quad)

Specifies the IP address of the computer
that contains the CD-ROM drive and is
running the FTP client.

Account Name

Default: N/A
Range: N/A

Format: alphanumeric (up to 20
characters)

Specifies the account name you have
already set up in your FTP client software.

Account Pass-
word

Default: N/A

Range: N/A

Format: alphanumeric (up to 20
characters)

Specifies the account password you have
already set up in your FTP client software.

CD-Rom File Path Default: <Enter file path here>

Range: N/A
Format: alphanumeric

Specifies the path for the CD-ROM drive
where the new PSAX system software
resides. Type over the default value
<Enter file path here>.

x:\upgrade.lib

Enter this command string if you are
upgrading from a PSAX system Release
6.0.0 or later using a Windows host
workstation.

Note:

x = the CD-ROM drive letter

/cdrom/v0900c00/upgrade.lib Enter this command string if you are

upgrading from a PSAX system Release
6.0.0 or later using a Unix host worksta-
tion.

License Key

Default: N/A
Range: N/A

Format: N/A

Lucent software license. This field is not
currently supported.

Summary of Contents for PacketStar PSAX 2300







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PacketStar PSAX 2300

Reviews:

Related manuals for PacketStar PSAX 2300

Brands by name

Popular brands

Lucent Technologies PacketStar PSAX 2300, User Manual

Search results

Summary of Contents for PacketStar PSAX 2300

Reviews:

Related manuals for PacketStar PSAX 2300

Brands by name

Popular brands