Lucent Technologies PacketStar PSAX 2300, User Manual, Page: 427 / 680

Share

Page: 427 / 680

Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 427

255-700-447

9-33

PacketStar

®

PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Chapter 9 Configuring SNMP Authentication Options

Configuring SNMP Notification

Retry Times

Default: 3

Range: 0–255

Format: Numeric

Specifies the number of retries to be attempted
when a response is not received for a generated
message. An application may provide its own
retry count, in which case the value of this object
is ignored.

Note:

This field only appears when the Notify

Type is set to V2Inform or V3Inform.

Usm User Name

Default: N/A

Range: 1–32

Format: Alphanu-
meric

Specifies the USM user name that the NMS will
use to access the PSAX system. You can specify
alphanumeric characters including A-Z, a-z, 0-9,
/ (forward slash), - (hyphen), and _ (underscore).
The text string is case-sensitive. The use of the
space character is not supported.

Note:

This field only appears when the Notify

Type is set to V3Trap or V3Inform.

Note:

This field value must match one of the

UsmUserName values on the Usm User Table
window. If there is no match, then you will not
be able to access the PSAX from an external
SNMP manager using SNMPv3 protocol.

Note:

If the Notify Type is set to V3Inform, then

the SnmpEngineID associated with the UsmUser-
Name value on the Usm User Table must be set to
the remote SNMP Engine ID. If it is not, then
delete the existing USM User and recreate the
user using the remote SNMP Engine ID.

Security Level

Default: NoAuthNo-
Priv
Range: N/A

Format: Predefined

Indicates the level of security for remote SNMP
messages or remote SNMP operations. Authenti-
cation verifies the identity of the sender of a mes-
sage by using secret key algorithms. Privacy pro-
vides encryption of the messages being sent.

Note:

This field only appears when the Notify

Type is set to V3Trap or V3Inform.

Note:

This field value must match the Security

Level value configured on the Usm User Creation
window. If there is no match, then you will not
be able to access the PSAX from an external
SNMP manager using SNMPv3 protocol.

NoAuthNoPriv

Indicates a security level without authentication
and without privacy.

AuthNoPriv

Indicates a security level with authentication and
without privacy.

AuthPriv

Indicates a security level with authentication and
with privacy.

Table 9-27. Field Descriptions for the Notification Configuration Window (Continued)

Field Name

Field Values

Description

«
...
425
426
427
428
429
...
»

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments