manualshive.com logo in svg

Lucent Technologies PacketStar PSAX 2300, User Manual

Share
Download
Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 552

Chapter 13  Upgrading PSAX System Software

Upgrading Using the XModem/YModem File Transfer Method

13-20

255-700-447

 PacketStar

®

 PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Filename

Default: N/A

Range: N/A

Format: alphanu-
meric

Specifies the filename on the CPUn module sys-
tem disk where the software upgrade files are 
received (stored).  For each file contained in the 
package of software upgrade files, enter the file-
name in this field, and then receive this file on 
the CPUn module system disk. This field is dis-
played only when the value XModem is selected 
in the Protocol field.

Note: 

All subdirectory and file names are listed in 

the readme.txt file accompanying the software 
upgrade files on the CD-ROM.

Send Options Panel

Protocol

Default: YModem

Range: N/A

Format: Predefined 
alphanumeric

Specifies the type of modem protocol used for 
sending data.

YModem

Indicates that the YModem protocol is to be used 
for sending the PSAX system files to the com-
puter workstation where you will store your 
PSAX system backup.

YModem-G

Indicates that the YModem-G protocol is to be 
used for sending the PSAX system files to the 
computer workstation where you will store your 
PSAX system backup.

XModem

Indicates that the XModem protocol is to be used 
for sending the PSAX system files to the com-
puter workstation where you will store your 
PSAX system backup.

File Type

Default: Binary

Range: N/A
Format: Predefined 
alphanumeric

Specifies the format of the file that will be trans-
mitted.

Binary

Indicates that the binary format is to be used. Use 
this format to download software upgrade files.

Text

Indicates that the ASCII text format is to be used. 
Use this format only when you are backing up 
PSAX system configuration (database) files to 
your computer workstation. Do not use it for 
software upgrade files. 

Table 13-11.  Field Descriptions for the XMODEM/YMODEM File Transfer Window (Continued)

Field Names

Field Values

Description

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands