manualshive.com logo in svg

Lucent Technologies PacketStar PSAX 2300, User Manual

Share
Download
Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 240

Chapter 6  Configuring ATM PNNI

Configuring an ATM PNNI Node

6-8

255-700-447

 PacketStar

®

 PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Node Lowest

Default: True

Range: N/A

Format: Predefined

Indicates whether or not this node is the root 
node.

True

The current node is the root.

False

The current node is not the root.

Res. Transit

Default: False
Range: N/A

Format: Predefined

Restricted Transit indicates whether the node is 
restricted to not allowing support of SVCs trans-
mitting from this node.

False

Indicates SVC transmission from the node is 
allowed, or not restricted.

True

Indicates SVC transmission from the node is not 
allowed, or restricted.

Complex Node

Default: False

Range: N/A
Format: Predefined

Specifies whether this node uses the complex 
node representation. This attribute determines 
the setting of the nodal representation bit in the 
nodal information group originated by this node.

False

Indicates that simple node representation is used. 

True 

Indicates that the complex node representation is 
used.

[Res Branching]

Default: False

Range: N/A
Format: Predefined

Restricted branching indicates whether the node 
is able to support additional point-to-multipoint 
branches. This attribute reflects the setting of the 
restricted branching bit in the nodal information 
group originated by this node.

False

Indicates that additional branches can be sup-
ported.

True

Indicates that additional branches cannot be sup-
ported.

[DB Overload]

Default: True

Range: N/A
Format: Predefined

Displays whether Database Overload is selected, 
which specifies whether the node is currently 
operating in a topology database overload state. 
This attribute has the same value as the nontran-
sit for PGL election bit in the nodal information 
group originated by this node.

True

Indicates the node is currently operating in a 
topology database overload state.

False 

Indicates the node is not currently operating in a 
topology database overload state.

[No of Ptses]

Default: 0 

Range: N/A
Format: Numeric

Displays the number of PTSEs displays the total 
PTSEs currently in the topology database(s) for 
this node.

Table 6-5.  Field Descriptions for the PNNI Node Configuration Window (Continued)

Field Name

Field Values

Description

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands