Lucent Technologies PacketStar PSAX 2300, User Manual, Page: 435 / 680

Share

Page: 435 / 680

Lucent Technologies PacketStar PSAX 2300 User Manual Download Page 435

255-700-447

10-7

PacketStar

®

PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Chapter 10 Configuring ATM Security Agents

Configuring ATM Security for ATM UNI Interfaces

Service Profile

Default: Integrity-
172

Range: N/A

Format: Predefined

Specifies the service type that is provided by the
ATM security agent on this signaling or routing
PVC according to the ATM Forum Specification
af-sec-0172.000.

Integrity-172

Indicates that the integrity security service with-
out replay/reordering protection will be provided
to this connection.

Integrity-Confiden-
tiality-172

Indicates that the integrity security service and
confidentiality security service without
replay/reordering protection will be provided to
this connection.

Integrity-
ReplayReorderPro-
tection-172

Indicates that the integrity security service with
replay/reordering protection will be provided to
this connection.

Integrity-Confiden-
tiality-ReplayReor-
derProtection-172

Indicates that the integrity security service and
confidentiality security service with replay/reor-
dering protection will be provided to this PVC.

Master Key Length Default: Key-128-

bits

Range: 40–256

Format: Predefined
(bits)

Specifies the length of the master key in bits.
Select a value from 40 to 256 bits (in increments
of 8 bits).

Master Key

Default: 0

Range: N/A
Format: Hexadecimal

Specifies the master key that is shared between
two peer security agents for integrity and/or con-
fidential security services.

[SKU Encryption
Algorithm]

Default: MD5
Range: N/A

Format: Predefined

Displays the encryption algorithm used for
encrypting session keys that need to be for-
warded from this security agent to the peer secu-
rity agent for this interface.

MD5

Indicates that the encryption algorithm used on
this interface will be MD5.

SHA-1

Indicates that the encryption algorithm used on
this interface will be SHA-1.

Integrity Security Service Panel

MAC Algorithm

Default: HMAC-
MD5
Range: N/A

Format: Predefined

Specifies the type of MAC algorithm that is used
for integrity security service on this interface.

HMAC-MD5

Indicates that the MAC algorithm used for integ-
rity security service is HMAC-MD5.

HMAC-SHA-1

Indicates that the MAC algorithm used for integ-
rity security service is HMAC-SHA-1.

Table 10-4. Field Descriptions for the ATM UNI Interface ATM Security Configuration Window

Field Name

Field Values

Description

«
...
433
434
435
436
437
...
»

Summary of Contents for PacketStar PSAX 2300









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments