Chapter 9 Configuring SNMP Authentication Options
Configuring the View-based Access Control Model (VACM)
9-28
255-700-447
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Re-assigning a User to a Different VACM Access Group
To modify the assignment of USM users and/or SNMP communities to VACM
security groups, perform the steps in the following procedure.
Begin
1
On the SNMP Agent System-Wide Configuration window, select the
VACM Security to Group Configuration option.
The Vacm Security to Group Table window is displayed.
2
On the Vacm Security to Group Table window, select the entry to modify
and press Enter.
The Vacm Security to Group Configuration window is displayed.
3
Review the record and make sure it’s the one you want to modify.
4
On the Vacm Security to Group Configuration window, modify the val-
ues in the fields according to the information provided in Table 9-23.
Note:
If you change the Vacm Security Name or Vacm Security Model,
a new entry will be added to the Vacm Security to Group Table in
addition to the existing entry. If you change the Vacm Group
Name, then the existing entry will be modified.
5
Select the Apply/Add command to apply the changes.
6
Select the Go Back to Previous Screen command.
The Vacm Security to Group Table window is displayed.
End
Deleting a User from a VACM Access Group
To delete the assignment of USM users and/or SNMP communities to VACM
security groups, perform the steps in the following procedure.
Begin
1
On the SNMP Agent System-Wide Configuration window, select the
VACM Security to Group Configuration option.
The Vacm Security to Group Table window is displayed.
2
On the Vacm Security to Group Table window, select the entry to delete
and press Enter.
The Vacm Security to Group Configuration window is displayed.
3
Review the record and make sure it’s the one you want to delete.
4
Select the Delete this Entry and Return command to delete the infor-
mation.
