Chapter 10 Configuring ATM Security Agents
Configuring ATM Security for ATM PNNI Interfaces
10-32
255-700-447
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Viewing ATM Security Agent Statistics for an ATM PNNI Interface—Signaling
PVC
To view statistics for a configured ATM security agent for an ATM PNNI Sig-
naling PVC interface, perform the steps in the following procedure.
Begin
1
On the ATM PNNI Interface ATM Security window, select the ATM
Security Stats - Signaling PVC command.
The ATM PNNI Interface ATM Security Statistics - Signaling PVC window
is displayed (see Figure 10-14).
2
The commands and fields on this window are described in Table 10-15
and Table 10-16.
3
To view all configured ATM security agents in the PSAX system, go the
procedure in the section, See “Viewing All ATM Security Agents in the
System” on page 45.
End
SKU Time Interval
Default: No-Auto-
matic-SKU
Range: N/A
Format: Predefined
Specifies the frequency of the session key update
for confidentiality security service for communi-
cation from this security agent to the peer secu-
rity agent.
No-Automatic-SKU Indicates that the session key update will be per-
formed only by executing a manual command.
Hourly
Indicates that the session key will be updated
automatically once per hour.
Daily
Indicates that the session key will be updated
automatically once per day.
Weekly
Indicates that the session key will be updated
automatically once per week.
[Sec Admin Status] Default: OutOfSer-
vice
Range: N/A
Format: Predefined
Displays the operational status of the ATM secu-
rity agent.
OutOfService
Indicates that the ATM security agent is out of
service.
InService
Indicates that the ATM security agent is in ser-
vice.
Table 10-14. Field Descriptions for the ATM PNNI Interface ATM Security Configuration - Signaling
PVC Window (Continued)
Field Name
Field Values
Description
