255-700-447
10-15
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Chapter 10 Configuring ATM Security Agents
Configuring ATM Security for ATM PNNI SVCC RCC Nodes
Begin
1
On the PNNI Node Configuration window, make sure you have already
created an ATM PNNI node by selecting the Create Node Entry com-
mand (see Chapter 6 for more information).
Note:
Do not bring the ATM PNNI node into service at this point, or, if
the node is already in service, take it out of service.
2
On the PNNI Node Configuration window, select the ATM Security
Config - Routing SVCC command.
The ATM PNNI SVCC RCC Security Configuration window is displayed
(see Figure 10-7).
3
Enter values in the fields on this window according to the information
provided in Table 10-8. Commands on this window are described in
Table 10-7.
Note:
If you select the value Integrity-Confidentiality-172 or Integ-
rity-Confidentiality-ReplayReorderProtection-172 in the
Service Profile field, the Confidentiality Security Service panel is
displayed on the window (see Figure 10-8).
4
To view statistics for this ATM security agent, go to the procedure in the
next section, “Viewing ATM Security Agent Statistics for an ATM PNNI
SVCC RCC Node”.
End
Figure 10-7. ATM PNNI SVCC RCC Security Configuration Window (Integrity
Security Service Only)
