LS Industrial Systems GLOFA G7M-DR20U, User Manual

Page: 113 / 367

Chapter 7. Usage of Various Functions
7-6
(3) Program example
When the input condition %MX000 turns On, the CH 0 is enabled following the set mode.
When the present value becomes 8,333,777, %Q0.0.0 turns On.
The present values are saved in Current_Value.
- For the additional settings, refer to the section Chapter 8. High Speed Counter ‘Parameter
settings’.
8) High speed counter parameter settings
(1) Format setting
(a) Linear counter
•
If HSC is designate as Linear counter, it can counts from -2,147,483,648 to 2,147,483,647.
•
When the counter value reaches 2,147,483,647, CY output is set for the next pulse input, and the counter stops.
•
When the counter value reaches -2,147,483,648, BORR output is set for the next pulse input, and the counter stops.
REMARK