47
OPERATOR’S RESPONSIBILITIES
9. Keep people, equipment and material outside of the work area.
10. Signal person(s) must be used when the operator’s vision is blocked or when working in hazardous
areas such as near power lines or people.
11. Keep a fully charged fire extinguisher and first aid kit in the operator’s cab at all times and be
familiar with the use of these items.
12. Always know the location of other machinery, vehicles, personnel and other obstacles in the
work area.
13. Never permit people on the machine platform while the machine is in operation.
14. Make sure everyone is clear of the work area before moving the hook, boom, load or outriggers.
15. Start and stop movements smoothly and swing at speeds that will keep the load under control.
16. Keep at least two full wraps of wire rope on drum when operating.
17. Use tag lines to keep loads under control when feasible.
18. Keep the load as close to the ground as possible.
19. Use shortest boom length required to complete job.
20. Never leave a running machine unattended or load suspended.
21. Always use outriggers in accordance with requirements of the Load Rating Chart and Operator’s
Manuals.
SIGNAL PERSON’S RESPONSIBILITIES
1. Standard crane signals must be used, and understood.
2. Assist the operator in safe and efficient operation, without endangering people or property.
3. Have a clear understanding of each lift to be made.
4. Signal people must place themselves where they can be clearly seen and where they can safely
observe the entire operation and out of harms way should something unexpected happen.
Summary of Contents for 80-160
