LOAD KING 80-160, Operator'S Manual

Page: 245 / 369

245
SAFETY PRECAUTIONS FOR MOUNTING OR DEMOUNTING RIMS AND WHEELS
DO’S AND DON’TS
DO DON'T
1. Deflate tires completely prior to
demounting by removing the valve core.
1. Do not use loads or inflation pressures
exceeding the manufacturer’s
recommendations.
2. Replace bent, cracked,worn, corroded,
or damaged parts.
3. Inflate tires in a safety cage.
2. Don’t re-inflate a tire that has been run flat
or seriously underinflated without first
demounting and inspecting the tire and rim
assembly.
4. Inspect wheel nuts periodically for
excessive wear, corrosion, proper
centering and nut torque.
Tire and rim servicing can be dangerous and must be done only by trained personnel
using proper tools and procedures. Failure to read and compy with all procedures may
result in serious injury or death to you or others.