LOAD KING 80-160, Operator'S Manual

Page: 196 / 369

196
80-160
Operating Instructions
1. Electric connection for dolly lighting equipment - rear.
2. Compressed air connection (yellow) for braking.
3. Compressed air connection (red) for supply output.
4. ABS socket 7-pole.
5. Dolly coupling (If a dolly coupling is part of our scope of delivery).
Check the dolly coupling daily for longitudinal play. Longitudinal play is not
permitted. Risk of dolly ripping free!
Function Description “Float Position” of the Superstructure
In order for the dolly system to be able to follow the vehicle movements in driving operation (curves /
bumps), the superstructure must be in the “float position” during “dolly operation”.
The “float position” must be set before beginning driving.
Be sure to follow the sequence of the handling steps described below.
Fitting the Dolly
Risk of accidents due to the dolly rolling independently! Using chocks, secure the
dolly against rolling away.
1. Check whether the dolly is secured against rolling away with chocks. If required, the dolly must still
be secured against rolling away using chocks (A).
A
A
DOLLY
2. Position the crane in front of the dolly so that the dolly can be pinned onto it later, without having
to move it.
3. Support the crane on outriggers.
4. Bring basic unit in transport configuration (in accordance with state and federal regulations or
national regulations and / or license).
5. Create connections between the dolly and the frame of the crane chassis.