LOAD KING 80-160, Operator'S Manual

Page: 207 / 369

207
Disassembly
Side Stow Jib Stowage
Before stowing the jib, ensure that no personnel or obstacles are in the swing
path of the jib.
Retract the boom fully before stowage the jib. The jib cannot be mounted/stowed if the boom is extended
even slightly.
Procedure for Jib Stowage
1. If the jib offset angle is other than 0°, change its offset to 0° before do this procedure, refer to the
“Changing the Jib Offset Angle” section.
2. Set the crane on fully extended outriggers in a location where enough space available for mounting
the jib.
3. Attach a guide rope to the eye on the bottom tip of the jib.
4. Remove the 4
th
pin (1) and then Winch down using jib remote control.
1
5. Remove the winch line and socket to jib base dead-end (2).
2