LOAD KING 80-160, Operator'S Manual

Page: 109 / 369

109
15.
RH Control Lever
RH Control Lever
THROTTLE LOCK
MAIN WINCH HS
MAIN WINCH ON/OFF
SWING PARK BRAKE
The RH joystick commands load lifting and lower with the main winch, raising and lowering the
telescopic boom, two speed winch control, winch disable and horn.
- Push WINCH DISABLE switch to “DISABLE” the Main Winch, LED green light will come
“ON”, winch function will be disabled. The Main winch function when it is not being utilized
prevents damage to the cable when it is on the winch, but not rigged over the boom head.
(e.g. cable tied off to winch drum, etc.)
- Push TWO SPEED WINCH switch to change Main winch speed to “HI”, LED red light will
come “ON” and Main winch wire rope take in and pay out speed will be in “HIGH” speed mode.
- Push joystick forward (MAIN WINCH DOWN) to lower the load with the main winch. The
winch wire rope speed for lowering the load is proportional to the throttle setting and
movement of the joystick.
- Pull back joystick (MAIN WINCH UP) to lift the load with the main winch. The winch wire rope
speed for raising the load is proportional to the throttle setting and movement of the joystick.
- Move the joystick to the left (BOOM UP) to raise the boom. The boom raising is proportional
in speed to the throttle setting and movement of the joystick.
- Move the joystick to the right (BOOM DOWN) to lower the boom. The boom lowering is
proportional in speed to the throttle setting and movement of the joystick.
When the joystick control is in the middle position (e.g. load and boom lowering) the two functions
are activated at the same time.