LG-Ericsson LDP-7004 D User Manual Download Page 400

Page: 400 / 686

LIP-8008D User Guide

If you are the Attendant or Secretary, you may activate

Intrusion

. You may also use

Step Call

; dial the next

station by dialing just the last digit of the Intercom
number.

To Camp-On (wait off-hook) for a busy station:



While placing a call to a busy station, dial * and wait for an

answer.

To Callback (wait on-hook) for a busy station:



While placing a call to a busy station, press the

CALL BACK

button and hang-up.

To make a Voice Over announcement to a busy station:



Dial #, and after the Splash tone is heard, begin speaking.

3.1.2 To leave a Message Wait

If the called user does not answer or is in DND mode,
you may leave a

Message Wait

. The called user will

receive a Message Wait indication; the MSG LED will
flash.

In iPECS-LIK

To activate Message Waiting:



Lift handset, and press the T

RANS

/PGM button,



Dial 556 (a confirmation tone will be heard) and hang-up.

In iPECS-MG

To activate Message Waiting:



Press

the

CALL

BACK button and hang-up.

3.2

External Calls

3.2.1 Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These ‘lines’
are accessed either using a button on the iPECS Phone
assigned as a

CO/IP line

or using dial codes. The

CO/IP lines are grouped for different types of calls, local,
long distance, etc. Using the

CO/IP line group

code,

you will be able to access any line from the group. A

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands