LG-Ericsson LDP-7004 D User Manual Download Page 539

Page: 539 / 686

LIP-8040L User Guide

The Attendants and Secretary may be able to activate

DND Override

and

Intrude

on an active call. The

Attendants may also cancel DND at other stations.

3.8

Forwarding Calls

3.8.1

Forwarding calls to another Station or Voice Mail

Incoming calls may be diverted to other resources of the
system. Resources include other stations,

VMIM/VSF

Voice Mail

and

External Voice Mail

. Your LCD and

the LCD of the forward receiver will both indicate the
forward status.
Call Forward can be activated from your phone or from
a different station (

Call Forward, Remote

). You may

define the conditions or ‘type of forward’ as below:

1: Unconditional—all calls to the station,

except recalls, are forwarded.

2: Busy—Immediately forwards all calls, except

recalls, when the station is busy.

3: No Answer—forwards all calls to the station,

except recalls, when the station does not

answer within the No Answer timer.

4: Busy/No Answer—forwards calls if the

station is busy or does not answer within the

No Answer timer.

When you forward calls from a different station, you may
need to enter your

Authorization Code

To toggle DND ON and OFF:



Press the

DND

button.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands