LG-Ericsson LDP-7004 D User Manual Download Page 528

Page: 528 / 686

LIP-8040L User Guide

2.2.5

Attendant menu (iPECS-LIK)

The Attendant menu is only available on the System
Attendant phone.

2.3

Using the Speakerphone

Activate the iPECS Speakerphone at any time (except
for Paging) in place of lifting the handset to receive or
place calls.



Set ICM Only Mode—Dial the Station Range for ICM
only calls (ex., 103-108=103108), and press the

Soft button.



Restore COS—Dial the Station Range for COS
restoring (ex., 103-108=103108), and press the

Soft button.



Monitor Conference Room—Enter the Conference
Room number to view the number of attendees in the
Conference Room.



Delete Conference Room—Enter the Conference
Room number and press the

Soft button to delete.

To access the Attendant menu:



From the Attendant Station phone, press the

ENU

button,



Press 0 (Attendant); the following will display:

SELECT (1 - 5)
1. DATE/TIME SET
2. SET ICM ONLY MODE
3. RESTORE COS
4. MONITOR CONF ROOM
5. DELETE CONF ROOM
BACK OK



Date/Time Set—Enter mm/dd/yy, and press

Soft

button; enter hh/mm, and press

Soft button.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands