LG-Ericsson LDP-7004 D User Manual Download Page 286

Page: 286 / 686

LIP-7024LD

User

Guide

２７

5. Transfer, Conference & Other Call Handling

5.1

Call Transfer: Sending a call to a different destination

You can send an active call to another station or other resource of the

system,

Call Transfer

. You can screen the transfer with the receiving

party (

Screened Call Transfer

) or complete the transfer without

screening (

Unscreened Call Transfer

Transferred calls, internal or external, are place in

Transfer Hold

, will

receive

MOH

and will recall if not answered in a timely manner.

If an

Unscreened Transfer

call encounters an error or DND, it may

immediately recall at your Station.

DSS/BLF buttons may be employed to transfer calls.

OPERATION

To Transfer an active call:



Press

TRANS

PGM



Call receiving party,



For Unscreened Call Transfer, hang-up,



For Screened Call Transfer, at answer or Splash tone, announce call.

5.2

Call Hold: Placing a call in a waiting state

You may place an active Internal or External call in one of several

holding states. In System Hold, other non-restricted stations may pick-

up the call. In Exclusive Hold, only the holding station may pick-up the

call.

The system is assigned a preferred hold type (System or Exclusive).

You may override this

Hold Preference

by pressing the

HOLD

SAVE

button

twice.

The LEDs for CO/IP line buttons flash at distinctive rates for the holding

station and other iPECS Phone users.

There are also user operations such as pressing a

DSS

BLF

button that will

place a call in

Automatic Hold

Calls will remain in the held state for a period and then recall the user.

This

Hold Recall

is provided with a different ring signal. If not

answered in a timely manner, the Attendant will receive

Attendant Hold

Recall

OPERATION

To place a call on Hold:



Press

HOLD

SAVE

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands