LG-Ericsson LDP-7004 D User Manual Download Page 267

Page: 267 / 686

LIP-7024LD

User

Guide

８

3. Receiving calls

3.1

Answering a Call While Idle

There are 3 basic types of incoming calls; internal/external ringing calls,

Intercom Voice Announce

calls, and

Hold

recalls.

Your phone may be assigned

Ringing Line Preference

; calls that ring

are answered by lifting the handset. Otherwise, you must press the

flashing Flex button.

External calls to an iPECS Phone will appear under the CO/IP line or a

LOOP

button

External calls are from CO lines or VoIP channels that are programmed

to ring at your phone. For external calls,

Delay Ring

may be assigned

allowing others to answer the call before the call rings at your phone.

Calls can be forwarded in some manner from another user; if providing

call coverage for other users, you may also receive

Station Call

Coverage

calls.

Calls placed on

Hold

, including Transfers, parked calls, etc. will recall if

left on hold for too long.

ICM Voice Announce

calls are answered based on the

ICM Signaling

mode

at the receiving phone; in Hands-free (HF) mode, after the splash

tone and announcement, speak normally into the microphone. In the

Privacy (PV) mode, lift the handset to respond. The

ICM Signaling

mode

can be assigned in

Station Programming

The LCD will display the calling number or, if available, the name of the

station or CO/VoIP line,

CO Line Name Display

OPERATION

To answer a call ringing at your phone:



Lift the handset and press the flashing Flex button (as needed), the

call will be connected.

To respond to an Intercom Voice Announce call:



mode signaling, simply speak as normal into the microphone,



mode signaling, lift the handset to respond.

3.2

Responding to a Call While Busy

While you are busy on another call, you may receive Muted Ring, Camp-

On tones, or Voice-Over announcements. Muted Ring is provided over

the speaker of your Phone indicating a

Call Waiting

. You also may

receive

Camp On

tones, a burst of tones on top of the existing call, as

an indication of another call waiting.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands