manualshive.com logo in svg

LG-Ericsson LDP-7004 D, User Manual, Page: 330 / 686

Share
Download
LG-Ericsson LDP-7004 D User Manual Download Page 330

LIP-8004D User Guide 

 

 

 

 

DND – 

Blocks all incoming calls; red LED illuminates. 

Speed – 

Access speed dialing, speed programming, 

save number redial and last number redial. 

Vol 

 

 – 

Adjusts volume for ringing, headset, and 

speakerphone; adjusts LCD brightness (in idle state). 

Trans/PGM –C

all transfer, or programming mode. 

Hold/Save – 

Places active call on hold or saves 

programming information. 

Call Back – 

Initiates call back request when calling a 

busy station; call connects when busy station is idle. 

On-hook Dial

 – Allows User to place a call while on-

hook. Toggle to activate; red LED illuminates. 

Flexible –

 Some are system pre-programmed for line 

appearance, and some are user programmable. 

Ring/MSG Indicator – 

Illuminates when ringing, or 

message waiting. 

LCD Display – 

Displays station number/current time or 

telephone number of destination while talking. 
 

1.5

 

LIP-8004D Phone Installation 

LIP Phones and Consoles can be connected to any 
standard 10/100 Base-T Ethernet switch port (shown in 
graphic).  When connected to an 802.3af compliant 
switch port (ex., POE8), LIP Phones and series 
consoles obtain power from the Ethernet port.  When 
LAN power is not available, the AC/DC adaptor must be 
used. The following image shows how to connect the 
handset, power cord, and LAN cable to the phone. 

 

iPECS LIP-8004D Connections 

 

 

3 

 

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments