LG-Ericsson LDP-7004 D User Manual Download Page 563

Page: 563 / 686

LIP-8040L User Guide

END

ETRIEVE

ESSAGES

6.1

Responding to a Station Message

Waiting Indication

Another station can leave a Station

Message Waiting

indication (MWI) when you do not answer or your phone

is in

DND

mode. The message icon will be displayed on

the LCD screen. If programmed, a flashing MSG LED
on the iPECS Phone also will indicate when there is a
Message Waiting. As a further notification, a

Message

Wait Reminder Tone

can be provided. You may

review and delete messages as well as respond with a
call back.

6. Send & Retrieve

Messages

To review your Station messages:



Press the

MSG

button, the LCD shows the Message

Summary display:

1. ICM MWI(002)
2. VSF MSG(002)
3. VMS MSG(001)
4. UMS MSG(003)
5. ICM SMS(00)

BACK OK



Dial 1 to view Station messages,



Press the navigation up/down button to scroll through
the messages.

To return a call from the list of Intercom (MWI):



Press the navigation up/down buttons to scroll through
the Intercom messages,



Press the

Soft button to select and place the return

call.

To delete a Station MWI:



Press the navigation up/down buttons to scroll through
the Station messages,



Press the

Delete

Soft button to select,



Dial 1 (Delete MWI).

To delete all Station MWIs:



Press the Delete Soft button,



Press 3 (Delete All MWIs).

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands