LG-Ericsson LDP-7004 D User Manual Download Page 268

Page: 268 / 686

LIP-7024LD

User

Guide

９

While busy, certain stations can activate

Voice-Over

to your phone. In

this case, audio is received from both the active call and the

Voice Over

announcement at the same time.

Respond to any of these

Off-hook Signals

in one of several ways; place

the existing call on

Hold

and respond to the new incoming call, activate

One-time DND

send a

Silent Text Message

, or ignore the new call.

Silent Text Message

requires a

TEXT MESSAGE

button, and cannot be sent

to a SLT or other non-display terminal.

The Attendant or Secretary may use

Intrusion

to announce a call while

you are busy.

OPERATION

To answer a Call Waiting:



Press

HOLD

SAVE

and/or,



Press the flashing

IP LINE

button.

To activate One-time DND:



Press the

DND

button.

To send a Silent Text Message:



Press the programmed

TEXT MESSAGE

button,



Select the desired message to send.

3.3

Using Answering Machine Emulation (AME)

When a call is connected to your voice mail, you can screen the call as

with a normal Answering Machine. The caller’s voice is played over

your speaker while the message is being recorded. There are two

methods of notification and call screening provided, Ring or Speaker

mode.

Ring mode(iPECS-Lik)/LED Blink mode(iPECS-MG)

—the AME

(Answering Machine Emulation) Flex button will flash to notify you of a

call. You may press the Flex button to hear the caller as the voice

message is stored.

Speaker mode

—when the call is sent to the voice mailbox, the caller’s

voice is automatically broadcast over the speaker of your iPECS Phone.

You may terminate screening, leaving the caller in voice mail to record a

message, talk with the caller and record the conversation in the mailbox,

or answer the call and disconnect the Voicemail. The AME feature is

only available when using the iPECS VMIM/VSF Voice Mail; a

UTE

and

AME

button are required.

OPERATION

In iPECS-Lik

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands