LG-Ericsson LDP-7004 D User Manual Download Page 346

Page: 346 / 686

LIP-8004D User Guide

3.3.2 Using and Entering Saved Number Dial

You may store the last number dialed on an external call
to the

Saved Number Dial

buffer for convenient dialing

at a later time. The Saved number is stored until a new
number is saved.

To place a call using Saved Number Dial:



Lift the handset,



Press

SPEED



Dial

To store a number in the Saved Number Dial:



While on an outgoing external call, press

SPEED

twice.

In iPECS-MG

To dial the Last Number for an external call:



Lift the handset,



Press

Speed Soft button,



Dial



press the LOG Soft button,



Press the Navigation up and down buttons to select from the

last 100 numbers dialed or received,



Press the Send Soft button or

HOLD

SAVE

3.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed Dial

numbers (bins 200-999). The

iPECS-300 & 600 systems each have memory allocated
for 3000

System Speed Dial

numbers (bins 2000-4999).

The iPECS-MG100 system has memory allocated for
1000

System Speed Dial

numbers (bins 2000-2999).

The iPECS-MG300 system has memory allocated for
2000

System Speed Dial

numbers (bins 2000-3999).

You may, if allowed, use

System Speed Dial

to call

frequently dialed numbers.
In some cases, these numbers are divided into groups
called

System Speed Zone Groups

. In this case, you

may access some numbers and not others and your
dialing restrictions may be invoked.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands