LG-Ericsson LDP-7004 D User Manual Download Page 419

Page: 419 / 686

LIP-8008D User Guide

7.8

Contrast (iPECS-LIK)

The Phone LCD brightness can be adjusted to your
preference.

7.9

Network Config.

The user can review the current network configuration
or modify a new phone network configuration.

To change the Phone LCD Contrast:



While the phone is idle, press the VOL

▲▼

buttons.



VOL

▲

will increase darkness.



VOL

▼

will decrease dark (brightness).

To access Network Config. Settings:



Press

RANS

/PGM button and Dial 78(iPECS-LIK)/80(iPECS-

MG),



Enter the password (default=147*), the following will display:



MFIM #1 –

CHANGE[#]



Press the # key to toggle between multiple profiles (MFIM),



Press

the

VOL

▲

VOL

▼

buttons to advance to the next

network configuration item,



Press

the

OLD

AVE

button to save each setting.

To set default Config settings:



In Network Config. Menu, use the VOL

▲

VOL

▼

buttons to

locate the Default Config Screen (shown),

Set default – [*]



Press the * key.

To exit Config. Settings:



Press

PEAKER



Press the * key to exit,



Press the # key to Reset/Reboot the phone with new settings.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands