LG-Ericsson LDP-7004 D User Manual Download Page 363

Page: 363 / 686

LIP-8004D User Guide

7.8 Contrast (iPECS-LIK)

The Phone LCD brightness can be adjusted to your
preference.

To change the Phone LCD Contrast:



While the phone is idle, press the VOL

▲▼

buttons.



VOL

▲

will increase darkness.



VOL

▼

will decrease dark (brightness).

7.9 Network Config.

The user can review the current network configuration
or modify a new phone network configuration.

To access Network Config. Settings:



Press

RANS

/PGM button and dial ##1(iPECS-LIK)/80(iPECS-

MG),



Enter the password (default=147*), the following will display:



MFIM
CHANG

#1 –

E[#]



Press the # key to toggle between multiple profiles (MFIM),



Press

the

VOL

▲

VOL

▼

buttons to advance to the next

network configuration item,



Press

the

OLD

AVE

button to save each setting.

To set default Config settings:



In Network Config. Menu, use the VOL

▲

VOL

▼

buttons to

locate the Default Config Screen (shown),

Set default – [*]



Press the * key.

To exit Config. Settings:



Press the On Hook Dial button,



Press the * key to exit,



Press the # key to Reset/Reboot the phone with new settings.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands