LG-Ericsson LDP-7004 D User Manual Download Page 306

Page: 306 / 686

LIP-7024LD

User

Guide

9.4

Wake-Up Alarm

iPECS supports an Alarm clock for each station in the system. The

alarm clock can be set to repeat daily or as a one-time alarm.

When responding to the alarm by lifting the handset, BGM will be

provided.

OPERATION

To set the Wake Up Alarm clock:



Press

TRANS

PGM



Dial the Station User Program code 41(iPECS-Lik)/13(iPECS-MG),



Dial 2-digit hour and minute for alerting,



For a daily (repeating alarm), dial #,



Press

HOLD

SAVE

To erase Wake-Up:



Press

TRANS

PGM



Dial the Station User Program code 42 (iPECS-Lik)/14(iPECS-MG),



Press

HOLD

SAVE

9.5

Alarm/Door Bell

The system can monitor external Alarm or Door Bell contacts:

Alarm Monitor—should the external contact activate, a unique Alarm

Ring signal and LCD display may be received. To restart the monitor

circuit, the external contacts must be deactivated and the Alarm Ring

signal terminated.

Door Bell—a unique Door Bell Ring (single tone burst) may be received

each time the external contact is activated. A system contact also can

be assigned to act as a Door Open contact.

OPERATION

To terminate the Alarm signal:



Dial 565.

To activate the Door Open contacts:



Lift the handset,



Dial Door Open code, #* and contact number 1-4.

NOTE—Contacts 3 & 4 are only available in the iPECS -300 & 600.

—Contacts 1 is available in the iPECS -MG.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands