LG-Ericsson LDP-7004 D User Manual Download Page 167

Page: 167 / 686

LIP-7008D

User

Guide

5.3

Broker Call: Switching between two calls

You may switch between the active call and a call on

Hold

, placing the

active call on Hold acting as a broker between two or more parties,

Broker Call

. iPECS Phone users may ‘broker’ for multiple calls up to the

number of

CO/IP line

buttons.

OPERATION

To switch between two calls, Broker Call:



Press the desired

CO/IP line

button.

5.4

Joining Multiple People in a Conference

You can establish a

Conference

with up to 3 parties (iPECS-Lik)/13

Party (iPECS-MG), or 24 parties when using a Multi-Party Conference

Interface Module (MCIM). The other parties in the

Conference

may be

internal or external.

Conference

can be placed on Hold and is subject to

Hold Recall

You may also use the Conference operation to join 2 external parties in a

private conversation. This is an

Unsupervised Conference

, which is

not subject to the normal Hold Recall operation.

CONF

Flex button is required.

OPERATION

To establish a Conference:



Establish call with one of the desired conference parties, and press

the

CONF

button when connected,



Establish call with another conference party, and press the

CONF

button when connected (repeat as needed to add more parties),



Press

CONF

again to establish the conference.

To place a Conference on Hold:



Press the

HOLD

SAVE

button; the

CONF

button LED will flash.

To retrieve the Conference from Hold:



Press

CONF

To establish an Unsupervised Conference:



Establish conference with two external parties,



Press

CONF

To retrieve an Unsupervised Conference:



Press

CONF

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands