LG-Ericsson LDP-7004 D User Manual Download Page 456

Page: 456 / 686

LIP-8012D & LIP-8024D User Guide

3.5

Answering Calls at Night

In the Night mode,

Loud Bell Control

may be used to

send ring signals to external bells. You may answer
these calls with

Universal Night Answer (UNA)

To answer a call ringing during night mode:



Lift the handset,



Dial 567(iPECS-Lik)/587(iPECS-MG) (UNA code).

In iPECS-MG
To download a Ring Tone from System memory:



Press

TRANS

PGM



Dial 2 for Ring Tones,



Dial 3 for Ring Tone download,



Dial the phone’s memory location to receive the tone (5-8),



Dial 0-9 for the desired tone number; a confirmation tone is
heard,



Press

HOLD

SAVE

to download.

To select a Ring Tone from phone memory:



Press the

TRANS

PGM

button,



Dial 2 for Ring Tones,



Dial 1 or 2 for Internal or External ring,



Dial 1 for Keyset Ring Source,



Dial 1-8 for the desired tone number; a confirmation tone is

heard,



Press

HOLD

SAVE

to make the selection.

To screen a call in Ring mode(iPECS-LIK)/LED blink
mode(iPECS-MG):



Press the flashing

AME

button, the caller’s voice is

broadcast over the station speaker and stored in the voice

mailbox (in the Speaker hearing mode, broadcast is

automatic).

To stop the voice broadcast and leave the caller in Voice
Mail:



Press the illuminated

SPEAKER

button.

To talk with the caller and record the conversation in Voice
Mail:



Press the

MUTE

button.

To answer the call and cancel the voice message recording:



Press the illuminated

AME

button, the caller is connected

and the Voice Mail disconnected.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands