LG-Ericsson LDP-7004 D User Manual Download Page 552

Page: 552 / 686

LIP-8040L User Guide

4.3.3

Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed Dial

numbers (bins 200-999). The

iPECS-300 & 600 systems each have memory allocated
for 3000

System Speed Dial

numbers (bins 2000-4999).

The iPECS-MG100 system has memory allocated for
1000

System Speed Dial

numbers (bins 2000-2999).

The iPECS-MG300 system has memory allocated for
2000

System Speed Dial

numbers (bins 2000-3999).

You may, if allowed, use

System Speed Dial

to call

frequently dialed numbers.
In some cases, these numbers are divided into groups
called

System Speed Zone Groups

. In this case, you

may access some numbers and not others and your
dialing restrictions may be invoked.
Only an Attendant can assign

System Speed Dial

numbers.

4.3.4

Using and Entering Station Speed Dial Numbers

Each station in the iPECS-100 System is allocated
memory for 20

Station Speed Dial

numbers (bins 00-

19) each up to 48 digits. The iPECS-300 & 600 support
100

Station Speed Dial

numbers (bins 000-099). The

iPECS-MG 100 & 300 each support 50

Station Speed

Dial

numbers (bins 000-049). These numbers are

entered at the user’s station and may include several
‘special’ instructions. Special instructions and the
corresponding button are:

PAUSE

will momentarily stop dialing.

FLASH as 1

digit—Activate dial tone detect.

To place a call using System Speed Dial:



Lift the handset,



Press the

DIR

Soft button,



Press the

speed

button(iPECS-LIK)/Dial 2 for System

Speed(iPECS-MG),



Dial the desired System Speed Dial bin number (200-
999 for iPECS-100 or 2000-4999 for iPECS-300 &
600) ,2000-2999 for iPECs-MG100 , or 2000-3999 for

iPECS-MG300).

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands