LG-Ericsson LDP-7004 D User Manual Download Page 111

Page: 111 / 686

LIP-7004N

User

Guide

3.3

Using Automated Dialing

3.3.1 Using Last Number Redial (LNR)

The last number dialed on an external call is automatically saved in the

Last Number Redial (LNR)

buffer.

OPERATION

To dial the Last Number for an external call:



Lift the handset,



Press

SPEED



Dial *.

3.3.2 Using and Entering Save Number Dial

You may store the last number dialed on an external call to the

Save

Number Dial

buffer for convenient dialing at a later time. The Save

Number is stored until you save new number.

OPERATION

To place a call using Save Number Dial:



Lift the handset,



Press

SPEED



Dial #

To store a number in the Save Number Dial:



While on an outgoing external call, press

SPEED

twice.

3.3.3 Using System Speed Dial Numbers

The iPECS-100 the system has memory allocated for 800

System

Speed Dial

numbers (bins 200-999). The iPECS-300 & 600 systems

have memory allocated for 3000 System Speed Dial numbers (bins
2000-4999). You may, if allowed, use the

System Speed Dial

to dial

frequently called numbers.
In some cases, these numbers are divided into groups called

System

Speed Zone Groups

. In this case, you may access some numbers and

not others and your dialing restrictions may be invoked.
Only an Attendant can enter

System Speed Dial

numbers.

OPERATION

To place a call using System Speed Dial:



Lift the handset,



Press

SPEED

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

LG-Ericsson LDP-7004 D, User Manual, Page: 111 / 686

Search results

Summary of Contents for LDP-7004 D

Reviews: