LG-Ericsson LDP-7004 D User Manual Download Page 240

Page: 240 / 686

LIP-7016D/7024D

User

Guide

Page Zones. The system has two External Page Zones that can be

connected to external speakers.

Page Zone codes in iPECS-Lik are:

1: Internal Page Zones

iPECS 100: 501-510

iPECS 300 & 600: 501-535

2: Internal All Call Page

543

3: External Page Zones

545-546

4: External All Call Page

548

5: All Call Page

549

Page Zone codes in iPECS-MG are:

Internal Page Zones :

543 + Zone No(01~15 ) (iPECS-MG100)

543 + Zone No(01~30) (iPECS-MG300)

Internal All Call Page

543 + 00

External Page Zone

548

All Call Page

549

If the desired Page Zone is busy, the User can elect to be recalled when

their turn comes in the queue. Users can also request a paged party

answer the Page using Meet-Me Paging. In this case, the paged party

may answer the page from any phone in the system by dialing the Meet-

Me code.

OPERATION

To make a page:



Lift the handset,



Dial the desired Page zone,



If assigned, after page warning tone, make announcement.

To queue for a page when busy is received:



Press the

CALL BACK

button,



Replace the handset returning to idle.

To answer a Meet-me-Page:



Lift the handset.



Dial

544 544

(iPECS-Lik)/

546

(iPECS-MG)

(Meet-Me-Page code)

8.4

Push-To-Talk (PTT) Page

iPECS Phones can be assigned as a member of one or more of the

system’s nine Push-To-Talk (PTT) page groups. Users separately log-

in or log-out of any one or all PTT groups to which the phone is assigned.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands