LG-Ericsson LDP-7004 D User Manual Download Page 184

Page: 184 / 686

LIP-7008D

User

Guide

9. Working with PBX, Centrex & ISDN features

9.1

Access PBX or Centrex

The iPECS has been designed to operate with a host PBX system or

Centrex services from your service provider. The iPECS connects to

such a host with analog CO lines.

When accessing a CO line, the phone will act as an extension of the host,

allowing access to the host system features using the host dial codes.

While on a call, use the iPECS

Flash

feature to transfer calls to other

host extensions or access features of the host. The

Flash

feature may

be used on other CO lines to regain dial tone from the CO line without

relinquishing control of the CO line to place another call.

OPERATION

To access PBX or Centrex features while idle:



Lift the handset,



Select/dial access a PBX/Centrex CO line,



Dial PBX/Centrex feature code.

To access PBX/Centrex features while on a PBX/Centrex CO line:



Press F

LASH



After receiving new dial tone, dial PBX/Centrex feature code.

9.2

Access the ISDN Network

9.2.1 Using the Keypad facility to access ISDN features

Access to certain features of your ISDN services requires that dialed

digits be sent to the ISDN as data and not tones. In this case, dialed

digits are sent as ‘Keypad messages’.

KEYPAD FACILITY

button must be assigned using the

Flex Button

program

procedures. Once active, dial into the ISDN for services;

however, actions other than dialing will deactivate the ‘Keypad message’

operation.

OPERATION

To activate Keypad Facility operation:



Press the K

EYPAD

ACILITY

button to switch to keypad mode,



Dial as desired.

To deactivate Keypad Facility operation:



Press K

EYPAD

ACILITY



Press a Feature or Flex button.

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands