LG-Ericsson LDP-7004 D User Manual Download Page 208

Page: 208 / 686

LIP-7016D/7024D

User

Guide

only available when using the iPECS VMIM/VSF Voice Mail; a

UTE

and

AME

button are required.

OPERATION

In iPECS-Lik

To assign an AME button:

Ring Mode –



TRANS

PGM

FLEX

+ 564 + 0 +

HOLD

SAVE

Speaker Mode –



TRANS

PGM

FLEX

+ 564 + 1 +

HOLD

SAVE

To screen a call in Ring mode:



Press the flashing

AME

button, the caller’s voice is broadcast over

the station speaker and stored in the voice mailbox (in the Speaker

mode, broadcast is automatic).

To stop the voice broadcast and leave the caller in Voice Mail:



Press the illuminated

SPEAKER

button.

To talk with the caller and record the conversation in Voice Mail:



Press the

MUTE

button.

To answer the call and cancel the voice message recording:



Press the illuminated

AME

button, the caller is connected and the

Voice Mail disconnected.

In iPECS-MG

To assign an AME button:

LED Blink Mode –



TRANS

PGM

FLEX

+ 524 + 1 +

HOLD

SAVE

Speaker Hearing Mode –



TRANS

PGM

FLEX

+ 564 + 2 +

HOLD

SAVE

3.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which

are ringing. The iPECS Phone has 14

Ring Tones

available for

differentiating ring from one phone to another. Four of the tones are

stored in the phone’s permanent memory; the remaining ten tones are in

the system’s memory. Four of these ten can be downloaded into the

phone memory for use as the 5

to 8

Ring Tone

OPERATION

To download a Ring Tone from System memory:

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands