LG-Ericsson LDP-7004 D User Manual Download Page 279

Page: 279 / 686

LIP-7024LD

User

Guide

２０



Return to an idle state by going on-hook; when the line comes

available, the Station will be notified with ringing.

4.2.3 Account Codes: Tracking External calls for billing

In some cases, you or your company may desire to track calls for billing

or other purposes. You may enter an Account Code, which is output

from the system to a printer in the SMDR report. You must have an

Account Code Flex button, see

Assigning fe

tures to Flex buttons

OPERATION

To enter an Account Code before the call:



Lift the handset,



Press the assigned

ACCOUNT CODE

button,



Dial the Account Code (1-12 digits),



Press *, Intercom dial tone is heard,



Place the CO/IP call as normal.

To enter an Account Code during a call:



Press the assigned

ACCOUNT CODE

button,



Dial the Account Code (1-12 digits),



Press *.

4.2.4 Disable dialing from your phone

You can temporarily ‘Lock’ your phone by activating

Temporary COS

which will disable all dialing from the phone. To deactivate

Temporary

COS

you must enter the station’s Authorization code.

OPERATION

In iPECS-Lik

To activate Temporary COS:



Press

TRANS

PGM



Dial 21 (User Program code),



Press

HOLD

SAVE

To deactivate Temporary COS:



Press

TRANS

PGM



Dial 22 (User Program code),



Dial your Authorization code,



Press

HOLD

SAVE

In iPECS-MG

To activate Temporary COS:

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands