LG-Ericsson LDP-7004 D User Manual Download Page 281

Page: 281 / 686

LIP-7024LD

User

Guide

２２



Select the Redial Soft button,



Press

▼

VOLUME

▲

to select from the last 10 numbers dialed,



Press the Send

Soft button or

HOLD

SAVE

NOTE—Press the Next Soft button to view the previously dialed
number.

4.3.2 Using and Entering Save Number Dial

You may store the last number dialed on an external call to the

Save

Number Dial

buffer for convenient dialing at a later time. The Save

Number is stored until you save new number.

OPERATION

To place a call using Save Number Dial:



Lift the handset,



Press the

SPEED

button,



Dial #.

To store a number in the Save Number Dial:



While on an outgoing external call, press

SPEED

twice.

4.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed

Dial

numbers (bins 200-999), for iPECS-MG 100(2000-2999). The

iPECS-300 & 600, iPECS-MG 300 systems each have memory allocated

for 3000

System Speed Dial

numbers (bins 2000-4999). You may, if

allowed, use

System Speed Dial

to call frequently dialed numbers.

In some cases, these numbers are divided into groups called

System

Speed Zone Groups

. In this case, you may access some numbers

and not others and your dialing restrictions may be invoked.

Only an Attendant can assign

System Speed Dial

numbers.

OPERATION

To place a call using System Speed Dial:



Lift the handset,



Press the

SPEED

button,



Dial the desired System Speed Dial bin number (200-999 for iPECS-

100, 2000-4999 for iPECS-300 & 600, 2000-2999 for iPECS-MG100,

2000-4999 for iPECS-MG300).

Summary of Contents for LDP-7004 D















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands

LG-Ericsson LDP-7004 D, User Manual

Search results

Summary of Contents for LDP-7004 D

Reviews:

Related manuals for LDP-7004 D

Brands by name

Popular brands