Lexmark 12N1515 - C 912fn Color LED Printer User Reference Manual Download Page 37

Page: 37 / 207

Printing

For Mac OS X v10.2:

In your program, go to File

Page Setup.

Under Format for, select the Any Printer option.

Under Settings, select Custom Paper Size, and then click New.

Enter the name for your custom paper size.

Enter the appropriate dimensions and margins.

Click Save.

Click OK.

In your program, go to File

Page Setup.

Under Format for, make sure that the Any Printer option is selected.

Under Paper Size, select the custom size you want to use.

Print your document.

Printing with custom size specialty media

Summary of Contents for 12N1515 - C 912fn Color LED Printer
















































































































































































































Search results

Summary of Contents for 12N1515 - C 912fn Color LED Printer

Reviews:

Related manuals for 12N1515 - C 912fn Color LED Printer

Brands by name

Popular brands

Lexmark 12N1515 - C 912fn Color LED Printer, User Reference Manual

Search results

Summary of Contents for 12N1515 - C 912fn Color LED Printer

Reviews:

Related manuals for 12N1515 - C 912fn Color LED Printer

Brands by name

Popular brands