Lexmark 12N1515 - C 912fn Color LED Printer User Reference Manual Download Page 26

Page: 26 / 207

Printing

•

Loading paper, transparencies, labels, and card stock

a Load paper, transparencies, labels, and card stock in the center of the tray with the

recommended print side face up.

b Continue with

step 6

Loading envelopes

a Load envelopes flap side down, with the flap closed, and with the return address area on

the right. Orient the envelopes so that the edge with the return address and stamp area
will enter the multipurpose feeder last.

Warning:

Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer.

Note: If envelopes jam while printing, try reducing the number of envelopes in the

multipurpose feeder.

b Continue with

step 6

Loading the multipurpose feeder

Summary of Contents for 12N1515 - C 912fn Color LED Printer
















































































































































































































Search results

Summary of Contents for 12N1515 - C 912fn Color LED Printer

Reviews:

Related manuals for 12N1515 - C 912fn Color LED Printer

Brands by name

Popular brands

Lexmark 12N1515 - C 912fn Color LED Printer, User Reference Manual

Search results

Summary of Contents for 12N1515 - C 912fn Color LED Printer

Reviews:

Related manuals for 12N1515 - C 912fn Color LED Printer

Brands by name

Popular brands