Commissioning and configuration
Leuze electronic
BCL 548
i
151
TNT
35/7-2
4
V
Input data
2 bytes consis 4..28 bytes of bar code information depending on the module
Output data
None
Remarks
The remarks for module 20 – decoder state, apply in an analogous manner.
In addition, all bytes beginning with address 1 are reset to the init. value.
Notice!
Shortening decoding results that are too long: If the bar code information (bar code possibly
including supplementary information such as the check sum) does not fit in the selected
module width, the decoding results are shortened. This shortening is either from the left or
the right depending on the setting in Module 30 – Data formatting.
Shortening is indicated by the passed bar code data length.
2)
If the bar code information (bar code and, possibly, other items such as the check sum) fits in the
selected module width, this value reflects the length of the transmitted data. A value larger than the
module width indicates a loss of information caused by a module width which has been selected too
small.
