Lenovo ThinkSystem SR550, Maintenance Manual

Page: 25 / 206

Figure 6. Front view of server models with eight 3.5-inch hot-swap drives (0-7)
Figure 7. Front view of server models with twelve 3.5-inch hot-swap drives (0-11)
Table 4. Components on the front of server models with 3.5-inch hot-swap drives
Callout Callout
1
Rack latch (left)
2
3.5-inch hot-swap drive bays
3
Drive activity LED
4
Drive status LED
5
Front I/O assembly
6
Rack latch (right)
7
Pull-out information tab
8
VGA connector (optional)
1 6 Rack latches
If your server is installed in a rack, you can use the rack latches to help you slide the server out of the rack.
You also can use the rack latches and screws to secure the server in the rack so that the server cannot slide
out, especially in vibration-prone areas. For more information, refer to the
Rack Installation Guide
that comes
with your rail kit.
2 3.5-inch hot-swap drive bays
The number of the installed drives in your server varies by model. When you install drives, follow the order of
the drive bay numbers.
The EMI integrity and cooling of the server are protected by having all drive bays occupied. The vacant drive
bays must be occupied by drive fillers.
Chapter 2
.
Server components
17