manualshive.com logo in svg

Lenovo ThinkSystem SR550, Maintenance Manual

The Lenovo ThinkSystem SR550 is a powerful and reliable server designed for optimal performance and flexibility. Unlock its full potential by accessing its comprehensive user manual, available for free download at our website. Experience hassle-free installation and setup, all while maximizing productivity and efficiency.

Share
Download
background image

http://sysmgt.lenovofiles.com/help/topic/LXPM/platform_update.html

• 

Lenovo XClarity Controller

If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific 
server.  

Notes: 

–  To perform an in-band update through Windows or Linux, the operating system driver must be installed 

and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

Additional information about configuring Ethernet over USB is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_ 
configuringUSB.html

–  If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded 

and installed the latest device drivers for the operating system that is running on the server.

Specific details about updating firmware using Lenovo XClarity Controller are available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_ 
manageserverfirmware.html

• 

Lenovo XClarity Essentials OneCLI

Lenovo XClarity Essentials OneCLI is a collection of command-line applications that can be used to 
manage Lenovo servers. Its update application can be used to update firmware and device drivers for 
your servers. The update can be performed within the host operating system of the server (in-band) or 
remotely through the BMC of the server (out-of-band). 

Specific details about updating firmware using Lenovo XClarity Essentials OneCLI is available at:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html

• 

Lenovo XClarity Essentials UpdateXpress

Lenovo XClarity Essentials UpdateXpress provides most of OneCLI update functions through a graphical 
user interface (GUI). It can be used to acquire and deploy UpdateXpress System Pack (UXSP) update 
packages and individual updates. UpdateXpress System Packs contain firmware and device driver 
updates for Microsoft Windows and for Linux.

You can obtain Lenovo XClarity Essentials UpdateXpress from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-xpress

• 

Lenovo XClarity Essentials Bootable Media Creator

You can use Lenovo XClarity Essentials Bootable Media Creator to create bootable media that is suitable 
for applying firmware updates, running preboot diagnostics, and deploying Microsoft Windows operating 
systems.

You can obtain Lenovo XClarity Essentials BoMC from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-bomc

• 

Lenovo XClarity Administrator

If you are managing multiple servers using the Lenovo XClarity Administrator, you can update firmware for 
all managed servers through that interface. Firmware management is simplified by assigning firmware- 
compliance policies to managed endpoints. When you create and assign a compliance policy to managed 
endpoints, Lenovo XClarity Administrator monitors changes to the inventory for those endpoints and flags 
any endpoints that are out of compliance.

Specific details about updating firmware using Lenovo XClarity Administrator are available at:

12

ThinkSystem SR550 Maintenance Manual

Summary of Contents for ThinkSystem SR550















































































































































































































Reviews:

No comments

Related manuals for ThinkSystem SR550

TDK-Lambda CM4 Application Notes preview
CM4
Brand: TDK-Lambda Pages: 29
JVA RSG1 Installation And User Manual preview
RSG1
Brand: JVA Pages: 22
jbc DSS Instruction Manual preview
DSS
Brand: jbc Pages: 12
Pattfield Ergo Tools PE-AGS 3,6 Li Manual preview
PE-AGS 3,6 Li
Brand: Pattfield Ergo Tools Pages: 238
Fein AFMM18 QSL Instruction Manual preview
AFMM18 QSL
Brand: Fein Pages: 58
Everwin PN65 Operation And Maintenance Manual preview
PN65
Brand: Everwin Pages: 12
Stanley FATMAX SFMCS650 Original Instructions Manual preview
FATMAX SFMCS650
Brand: Stanley Pages: 12
M7 PC-1012 Manual preview
PC-1012
Brand: M7 Pages: 14
Functional Devices, Inc. PSC100AB10 Installation Instructions preview
PSC100AB10
Brand: Functional Devices, Inc. Pages: 2
Parkside PAT 4 B2 Translation Of The Original Instructions preview
PAT 4 B2
Brand: Parkside Pages: 109
Parkside PKGA 20-Li A1 Translation Of The Original Instructions preview
PKGA 20-Li A1
Brand: Parkside Pages: 100
Altrad ATIKA 302360 Original Instructions Manual preview
ATIKA 302360
Brand: Altrad Pages: 128
NovoPress HP 300 Repair Instructions preview
HP 300
Brand: NovoPress Pages: 46
FROGBRO LD006A Instructions Manual preview
LD006A
Brand: FROGBRO Pages: 8
Swivelpole Maxis User Manual preview
Maxis
Brand: Swivelpole Pages: 2
XPOtool 34178 User Manual preview
34178
Brand: XPOtool Pages: 5
Hama 00173221 Slim Operating Instructions Manual preview
00173221 Slim
Brand: Hama Pages: 18
Weller 037103303912 Instructions Manual preview
037103303912
Brand: Weller Pages: 10

Brands by name

Popular brands

Load more brands