Lenovo 7D1J Reference Download Page 100 | Manualshive

Page: 100 / 246

background image

This message is for the use case when an implementation has detected that Post Error has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0185

User Action:

Information only; no action is required

•

FQXSPMA2024I: Sensor [SensorElementName] has deasserted.

This message is for the use case when an implementation has detected a Sensor has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Memory
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509

User Action:

Information only; no action is required

•

FQXSPNM4000I: Management Controller [arg1] Network Initialization Complete.

This message is for the use case where a Management Controller network has completed initialization.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - BMC Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0001

User Action:

Information only; no action is required.

•

FQXSPNM4001I: Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].

This message is for the use case where a user modifies the Ethernet Port data rate.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0003

User Action:

Information only; no action is required.

•

FQXSPNM4002I: Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3].

This message is for the use case where A user modifies the Ethernet Port duplex setting.

Severity: Info
Serviceable: No

96

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

«
...
98
99
100
101
102
...
»

Summary of Contents for 7D1J























































































































































































































































Reviews:

No comments

Related manuals for 7D1J

Azure StorSimple 8100

Brand: Microsoft Pages: 12

Brand: W&T Pages: 228

Brand: RackSolutions Pages: 8

Brand: AIC Pages: 79

Ultra Enterprise 3000

Brand: Sun Microsystems Pages: 48

S7000FC4UR - Server System - 0 MB RAM

Brand: Intel Pages: 13

6180DN - Phaser Color Laser Printer

Brand: Xerox Pages: 2

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 25

DIRECTORY SERVER 2.0 - GATEWAY

Brand: Red Hat Pages: 66

LANTIME IMS-M500

Brand: Meinberg Pages: 63

Brand: AirLive Pages: 106

Brand: IBM Pages: 4

3C16115-US - SuperStack 3 Webcache 1000

Brand: 3Com Pages: 176

Brand: QUANTA Pages: 34

STRATOS S200 Series S200-X12TS

Brand: QUANTA Pages: 245

Brand: Planet Pages: 149

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands