Lenovo 7D1J Reference Download Page 23

Page: 23 / 246

•

0401007B: Fan 2 Tach A: Fan sensor, warning event was asserted, reading value %RPM (Threshold

%RPM)

Asserted when fan tach reading is below warning threshold in RPM.

Severity: Warning
Alert Category: Thermal - System Thermal event
SNMP Trap ID: 67174523

User Action:

1. Ensure the indicated fan module properly installed.

2. If the event persists, reseat the indicated fan module. (Service technician only)

3. If the event persists, replace the indicated fan module. (Service technician only)

4. If the event persists, please consult with technical service.

•

0401007C: Fan 2 Tach B: Fan sensor, warning event was asserted, reading value %RPM (Threshold

%RPM)

Asserted when fan tach reading is below warning threshold in RPM.

Severity: Warning
Alert Category: Thermal - System Thermal event
SNMP Trap ID: 67174524

User Action:

1. Ensure the indicated fan module properly installed.

2. If the event persists, reseat the indicated fan module. (Service technician only)

3. If the event persists, replace the indicated fan module. (Service technician only)

4. If the event persists, please consult with technical service.

•

0401007D: Fan 3 Tach A: Fan sensor, warning event was asserted, reading value %RPM (Threshold

%RPM)

Asserted when fan tach reading is below warning threshold in RPM.

Severity: Warning
Alert Category: Thermal - System Thermal event
SNMP Trap ID: 67174525

User Action:

1. Ensure the indicated fan module properly installed.

2. If the event persists, reseat the indicated fan module. (Service technician only)

3. If the event persists, replace the indicated fan module. (Service technician only)

4. If the event persists, please consult with technical service.

•

0401007E: Fan 3 Tach B: Fan sensor, warning event was asserted, reading value %RPM (Threshold

%RPM)

Asserted when fan tach reading is below warning threshold in RPM.

Severity: Warning
Alert Category: Thermal - System Thermal event
SNMP Trap ID: 67174526

User Action:

1. Ensure the indicated fan module properly installed.

2. If the event persists, reseat the indicated fan module. (Service technician only)

Chapter 2

SMM2 events

Summary of Contents for 7D1J























































































































































































































































Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands

Lenovo 7D1J, Reference

Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands