Lenovo 7D1J Reference Download Page 226

Page: 226 / 246

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

5. If the problem persists, please contact technical support.

•

FQXPMOS0002K: Failed to read Deployment Manager Signature from USB.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. If the problem persists, reflash BMC firmware.

4. Retry OS deployment.

5. If the problem persists, perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0003K: Failed to copy Windows boot files to target

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0004K: BMC Communication Failed: EMMC2USB Mount Failure.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0005K: BMC communication failed: DRIVER Mount Failure.

Severity: Warning

222

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

Summary of Contents for 7D1J























































































































































































































































Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands

Lenovo 7D1J, Reference

Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands