Lenovo 7D1J Reference Download Page 32

Page: 32 / 246

2. If the event persists, please consult with technical service.

•

086F0380: PSU 1: Power Supply, Power Supply input lost (AC/DC) was asserted.

The indicated power supply reports the input or line cord is lost.

Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141493120

User Action:

Information only; no action is required.

•

086F0381: PSU 2: Power Supply, Power Supply input lost (AC/DC) was asserted.

The indicated power supply reports the input or line cord is lost.

Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141493121

User Action:

Information only; no action is required.

•

086F0680: PSU 1: Power Supply, Configuration error was asserted.

The indicated power supply does not supported by this enclosure.

Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141493888

User Action:

1. Ensure the type of indicated power supply in the support list.

2. If the event persists, reseat the indicated power supply.

3. If the event persists, replace the indicated power supply. (Service technician only)

4. If the event persists, please consult with technical service.

•

086F0681: PSU 2: Power Supply, Configuration error was asserted.

The indicated power supply does not supported by this enclosure.

Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141493889

User Action:

1. Ensure the type of indicated power supply in the support list.

2. If the event persists, reseat the indicated power supply.

3. If the event persists, replace the indicated power supply. (Service technician only)

4. If the event persists, please consult with technical service.

•

106F0201: EvtLogDisabled: Event Logging Disabled, Log Area Reset/Cleared was asserted.

SMM2 system event log is cleared.

Severity: Information
Alert Category: System - SMM2 system event
SNMP Trap ID: 275710465

User Action:

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

Summary of Contents for 7D1J























































































































































































































































Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands

Lenovo 7D1J, Reference

Search results

Summary of Contents for 7D1J

Reviews:

Related manuals for 7D1J

Brands by name

Popular brands