278
12
Appendix
12
Appendix
12.1
CP Default Configuration
For the general functionality of the communication processor (CP), a standard configuration
is required, which becomes effective in case of invalid CP parameter queries or invalid CP pa-
rameter configurations. This is listed below:
Parameter
Default Value
Remarks
SPS name
PLC <host name>
Everything is valid, up to 32 characters
IP address
192.168.11.200
Invalid: X.X.X.0 or X.X.X.255
Subnet mask
255.255.255.0
Invalid: 0.0.0.0
Gateway
192.168.11.4
Everything is valid
Primary DNS
192.168.11.1
Everything is valid
Secondary DNS
192.168.11.4
Everything is valid
Host name
cms00
Everything is valid, ASCII,
up to 15 characters
DHCP
Enabled
Valid: 0, 1
If DHCP is enabled but no DHCP server is
available, ’AutoIP’ is activated after a timeout
of 60 s. Random IP in the range of :
169.254.1.0 - 169.254.254.255
Subnet mask: 255.255.0.0
SNTP
217.79.179.106
Everything is valid, without SNTP = 0.0.0.0
SNTP interval
720 Min.
-32768 ... 32767
LSB termination
Enabled
0,1
LSB family
1
1, 2, 3, 4
Time zone
UTC (0)
-32768 ... 32767
Summary of Contents for AEC-TPS
