Lamtec AEC-TPS, Manual

Page: 11 / 284

10
1 Important Information about the Manual
1.4 Abbreviations
A/D con-
verter Analogue/Digital converter
AEC-ST Actuator Extension Component - Stopper Motor
AEC TPS Actuator Extension Component Three Point Step = module for DPS motors
with potentiometer feedback
AEC VS Actuator Extension Module Variable Speed = module for frequency inverters or
servo motors with 4 ... 20 mA interface
BS Burner sequencer
CMS Combustion Management System
CPI Closed Position Indication
DIN EN German Institute for Standardisation European Standard
DLTxxxx LAMTEC document number
EBM112 PROFINETmodule
ESD Electro Static Discharge
FI Frequency inverter
FFDT Flame failure detection time of the flame scanner
FFRT Flame failure response time = safety time during operation = sum of the param-
eter values of P 801 +P 816 + FFDT
GUI607 Graphical User Interface with 7" touch panel
GUI610 Graphical User Interface with 10" touch panel
GUI615 Graphical User Interface with 15" touch panel
HMI Human Machine Interface
IACS International Association of Classification Societies
ICOM Internal communication of the module
IDLE Open-circuit operation
iLSB Failsafe LAMTEC SYSTEM BUS
IO Input/Output
IP xx Protection class according to EN60529, xx = protection class code
LAN Local area network
LED Light emitting electrode
LSB LAMTEC System Bus
MCC Master Control Component = burner module
Middle-
ware Software for data exchange between application programs working with differ-
ent operating systems or in heterogeneous networks.
MTBF Meantime between failure = average operating time between failures for repair-
able units
NTC Negative temperature coefficient
P xxx P = parameter, xxx = number of the parameter
PEC Programmable electronic component = Module of the CMS system
PLC Programmable logic control system